Connection of two 2N devices to one lock using potential outputs

FAQ > Connection of 2 devices to one lock > 2_output_1.png

To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.

FAQ > Connection of 2 devices to one lock > 2_out_schem.png

To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.

Connection of two 2N devices to one lock using non-potential relays

FAQ > Connection of 2 devices to one lock > 2_relay.png

For the lock connection, we highly recommend using the output with installed 2N® Security Relay (Part No. 9159010) for enhanced installation security.

Connection of one 2N device and 3rd party controller using potential outputs

FAQ > Connection of 2 devices to one lock > 2.png

To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.

FAQ > Connection of 2 devices to one lock > 2_out_3rd.png

To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.

Date of release: 27. 5. 2021

Used devices in manual:

2N IP Verso (firmware version 2.32)
2N Access Unit 2.0 (firmware version 2.32)

List of compatible Hardware:

2N IP Verso
2N IP Vario
2N IP Force
2N IP Safety
2N IP Base
2N IP Solo
2N Access Unit 1.0 & 2.0
2N Access Unit M