In case it is needed to use an IndoorTouch for opening the lock without picking up the call, it is possible to setup the installation to do so with automatic call hangup after pressing the lock button.

Note: An integration of Gold license required.

Lets pretend the intercom has an IP address 192.168.1.10 for our example.

 

In the intercom's web interface, go to Hardware / Switches / Switch1 and type to the Switch-On Command field:

192.168.1.10/api/call/hangup?session=1

 

Now, it is needed to setup the security for this feature. There are 2 ways to go on:

Unsecured:


Password protected:

 

Now it is ready to use unlocking and hanging up procedure in one step.