Skip to end of metadata
Go to start of metadata

Info

Icon

This FAQ describes, how to connect Legacy intercom to 2N® Access Unit with  2N® IP Security Relay.
In few steps you will learn how to connect the Legacy intercom and configure the unit.

 

If you are using an External RFID Card Reader 125kHz + 13.56MHz with NFC (USB)

  • You must use 2N® Driver for External USB Readers 1.3.0 - here

We strongly recommend using 2N® Access Unit with the latest firmware

  • You can download the firmware here

How to connect Legacy intercom to 2N® Access Unit along with 2N® IP Security Relay and configure it

Electrical Connection

  1. In first step simply connect output from your Legacy intercom to one of the inputs on 2N® Access Unit via two wires we will use input marked IN1.

  2. Connect two wires from OUT1 on 2N® Access Unit to input on the 2N® IP Security Relay
    You can learn more about it in this manual - Security, 2N® IP Security Relay - what it is and how to use it with 2N® IP Intercom?

    Why to use an 2N® IP Security Relay

    Icon

    2N® IP Security Relay

    • It significantly enhances security of the connected electric lock because it prevents the lock from opening by forced intercom or Acces Unit tampering.
    • It is a small device installed between 2N® Access Unit which is placed outside the secured area and the electric lock installed inside the secured area.
    • It includes a relay that can only be activated if the valid opening code is received from the Acces Unit.
    • It is designed for any 2N® Access Unit or 2N® IP Intercom model with firmware versions 1.15 and higher.

Configuration

  1. Connect to IP address of 2N® Access Unit and go to section "Hardware-> Switches"
    Controlled Output: Output1 - the output we use to connect unit with 2N® IP Security Relay
    Output Type: Security - this is needed for the 2N® IP Security Relay to work correctly
  2. Go to section "Services-> Automation"

    Create an automation as shown below
  3. In this step we will add the RFID card entry.
    If you have External RFID Card Reader 125kHz + 13.56MHz with NFC (USB)9137421E, 9137424E, 9137420E
    You can skip directly to point 4 creating user

    If you do not have an external usb reader
    Go to section 
    "Events-> Access Log"
    Swipe your Card/Fob and you should be able to see it as shown in the picture below
    Copy the Card ID
  4. Go to section "Directory -> Users" 
    Create new user

    Name: Robert - name of the tennant
    PIN Code: 1234 - unique Code for unlocking the door 
    Card ID: D5BA593A - the ID of your Card
    If you have an external USB Reader you can click on the Card icon and by placing your Card on the Reader the Card will be send to 2N® Access Unit

    Bluetooth

    Icon
    If you want to gain acces by using Bluetooth fucntion please follow this manual - Bluetooth & 2N® Mobile Key - Opening a door via Bluetooth with a 2N® Access Unit



  • No labels