Skip to end of metadata
Go to start of metadata

Info

Icon

This FAQ describes how to setup simple call between 2N® LiftIP and IP Phone.

 

* This parameter can be set via the voice menu (incoming call to 2N® LiftIP).

** This parameter can only be set via the Service Tool.

List of all parameters that can be configured can be seen in the manual - Programming Function Survey

 

Please keep on mind that if you will disable confirmation for alarm calls, then you are doing this at your own risk as there is no human interaction!

Direct call to IP Phone - without PBX

Connect to 2N® LiftIP

Connect to your 2N® LiftIP using 2N® LiftIP Service Tool which you can download - here

  • It is necessary to use the 2N® Lift IP Service Tool as VoIP parameters can't be set via the voice (incoming call to 2N® LiftIP)

You can connect directly by choosing TCP and filling the correct IP address, Port and Password
If you don't know the IP address please use the FAQ - How to get IP address of lift communicator 2N® LiftIP.
If you need to set Static IP addres or DHCP please use this FAQ - Static IP address - How to set up static IP address on 2N® LiftIP

Press Connect

How to set the call destination

Go to Configuration - Parameters - Alarm Call -> and set following parameters:

011 =* IP address of your IP Phone, in our example we use "192.168.50.160"
018 =* Count of automatic dialing cycles for ALARM (011-016) * - when the destination doesn't pickup it calls again depending on the count of cycles you set

111 =* Alarm call memory confirmation mode  - defines how the call is confirmated after pick-up
  x1x = Alarm button (1-6)
  xx1 = Type of confirmation 

  • 1 = with DTMF confirmation (1)
  • 2 = with pick-up confirmation (for GSM/UMTS/VoIP only) - no confirmation, just pick-up the handset
  • 3 = CPC Antenna
  • 4 = CPC Kone
  • 5 = P100
  • 6 = DTMF auto detection (CPC Antenna/P100)
  • 7 = CPC Antenna 2N ext
  • 8 = CPC Kone 2N ext
  • 9 = P100 2N ext

You can find all parameters in the Programming Function Survey

Don't forget to click on Save to device

Now your 2N® LiftIP is ready to make a call to IP phone.

Call via SIP Proxy - How to register 2N® LiftIP to SIP Proxy

Connect to a SIP Proxy server

Go to Configuration - Parameters - VoIP settings -> set following parameters


1105 =** IP Addres of the SIP Proxy server
1106 =** Username
1107 =** Password
1109 =** SIP registrar port - usually 5060 is used for SIP communication

1112 =** Display name - this will appear on the display of the party you are calling to

Don't forget to click on Save to device

How to set the call destination

 Go to Configuration - Parameters - Alarm Call -> set following parameters

011 =* URI number of the device you want to call, in our example we use "201"
018 =* Count of automatic dialing cycles for ALARM (011-016) - when the destination doesn't pickup it calls again depending on the count of cycles you set

111 =* Alarm call memory confirmation mode - defines how the call is confirmated after pick-up
   x1x = Alarm button (1-6)
   xx1 = Type of confirmation 

  • 1 = with DTMF confirmation (1)
  • 2 = with pick-up confirmation (for GSM/UMTS/VoIP only) - no confirmation, just pick-up the handset

Don't forget to click on Save to device

Now your 2N® LiftIP is ready to make a call to IP phone via SIP Proxy.