Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

How to configure CUCM 11

How to add user

First of all you have to create user. Create new user by clicking on Add New in section User Management->End User.

For this FAQ we choosed number 3650. All fields which contains this number in picture below has to be filled.

Pictures below shows rest of configuration of this section, it is in default state.

How to add device

In this step you have to create device (phone). Create new device by clicking on Add New in section Device->Phone.

Now you have to configure the newly created device. Fill MAC Address. For parameter Phone Button Template choose Third-party SIP Device (Advanced) if you have intercom with camera. If you have intercom without camera, you can choose Third-party SIP Device (Basic). Make sure that other configuration corresponding with configuration below.

How to add line

In this step you have to create line for the newly created device. Create line by clicking on Add a new DN as you can see in picture below.

Edit the other configuration regarding the pictures below.


  • No labels