Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

How to make test call from softphone to 2N® VoiceBlue MAX

  • After you set up 2N® VoiceBlue MAX the most simple way to test basic functionality is to make test calls from you PC.
  • In this guide you will find the instructions for making a direct call to the 2N® VoiceBlue MAX from X-Lite and SJphone

X-Lite Configuration

  • In the X-Lite menu Softphone -> Account Setting set up the user account

  • The only important thing which should be set up in correctly is Proxy Address; it should be the IP address of the 2N® VoiceBlue MAX. User ID and Domain are mandatory parameters but it doesn’t matter what you set up in these fields.
  • Then just dial number without IP address.

  • For incoming calls its necessary to set up ports range allowed for incoming SIP messages.

SJphone Configuration

  • In SJphone Options -> Profiles section choose SIP Direct. This account is basically available in default configuration.

  • Dial the number in format sip:called_number@VBM_ip_address

Settings on the 2N® VoiceBlue MAX side.

  • The IP address of you PC should be input into the SIP Proxy list (Gateway configuration -> VoIP Parameters -> SIP proxy (IP -> GSM) -> Alternative. Note that you can fill in up to 9 IP addresses from which you can receive SIP traffic. If SIP proxy (IP -> GSM) is, 2N® VoiceBlue MAX could accept SIP traffic from any host.
  • To allow incoming calls from GSM to IP it’s necessary to fill the SIP proxy (GSM -> IP).

  • No labels