Skip to end of metadata
Go to start of metadata

This feature enables you to increase security for example in areas of research laboratories, financial centers, banks, etc. – simply wherever you need to protect something.

Thanks to this feature you can specify that special doors will be open only if you enclose the RFID card and enter special code in predefined time (both can be done by one person). For higher security you can set that two RFID cards or two specific codes have to be entered (double person identification). This is very good protection against theft of your RFID card. Double authentication with card and code can be done via native feature, authentication with two cards has to be done via automation as described below.

2. How to set double way identification in 2N® IP Intercom
Go to section "Directory->Usersand choose one of the users. Then you can define Switch code and Card ID for the user.

  •  firmware 2.23.1 and older:

  •  firmware 2.24.0 and later:

 

Then in section "Hardware - Door - Entry Rules" you just have to set "Card, Code". Now this particular user has to swipe the card and enter the code as well to activate the switch. 

  •  firmware 2.23.1 and older:

  •  firmware 2.24.0 and later:

2. How to set double person identification in 2N®  IP Intercom
Go to section "Services->Automation" and use one of the Functions there. Then follow the screen below and create the function. Set the card IDs of two users you would like to use for double card authentication. This will ensure, that once the first user swipe the card, the other one has to swipe within 7 seconds to activate the switch.

Automation you can download here: Double identification.am


Note:all commands used in the Automation section are deeply described in our 2N®  IP Intercom Automation manual. This manual is available on our web pages:

https://wiki.2n.cz/hip/auto/latest/en