Bria softphone - How to configure it with 2N® Helios IP (using SIP Proxy)

If you would like to make video calls from your 2N® Helios IP to your smartphone, you will need application which supports video transmission. One of those applications is Bria which is available for iOS and also for Android mobile phones.

Note: For proper video transmission must your SIP Proxy support the codec H.264! (if more video codecs are supported, then allow H.264 as the only video codec in case of troubleshooting)

2N^® Helios IP settings

Connect to the Helios IP web configurator and enable one of the quick dial button position. When it is enabled, then specify position name and phone number of the Bria client.

How to configure 2N® Helios IP intercom – FW version 2.6 and higher

In the next step register your 2N® Helios IP to SIP proxy (IP PBX).

How to configure 2N® Helios IP intercom – FW version 2.6 and higher

As a last setting in 2N® Helios IP, go to Advanced Settings -> Video Codecs and set the video resolution and bitrate according to picture below. If you set better parameters, it can happen that the video will be jamming (this depend on quality of your network).

How to configure 2N® Helios IP intercom – FW version 2.6 and higher

BRIA setting

Download Bria application from App Store (iOS) or Google Play (Android) and install it. Please do not forget to buy also Video license for Bria application if you want to make video calls. Then run the application and fill in information which is necessary for correct registration.

Then move to Account Advanced setting and check if the SIP Network Traversal is activated for Wi-Fi and also for Mobile if you call via mobile data connection.