Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Tap in App Mode - Overview

Tap in App uses Bluetooth wireless communication technology between two devices over a distance. It is based on communication between two paired devices for secure authentication.

...

† Using Android 6 or 7 will have a slower device connection speed than Android 8.

Functions

Bluetooth is used for exchanging information between two devices for a short distance. This identification is provided by a unique code of the end devices that contains this technology, like almost every smartphone these days. There is a communication between the smartphone and 2N® IP Verso intercom (or 2N Access Unit) equipped with a Bluetooth module. This communication is secure and based on public and private keys that are exchanged (we use RSA-1028 asymmetric encryption and AES-128 symmetric encryption).

 

Requirements

2N® IP Verso with firmware version 2.32 or higher

...

Location enabled on phone (for Android only)

Navigation

Step by step guide - How to setup connection between 2N® Mobile Key app and 2N IP Intercom (pair devices)

Tap in App Mode - how to setup 2N® Mobile key and use the featureStep by step guide - How to open paired doors using 2N® Mobile Key app

Step by step guide - How to setup connection between 2N® Mobile Key app and 2N IP Intercom

1)      Please open web configuration of 2N IP Intercom and navigate to section Hardware --> Extenders and locate Bluetooth module.
Launch Authentication by "Touch in application" is selected and you can specify the distance (Signal Range) within which your smartphone will communicate with the Bluetooth module.

...

 7). The app will ask for authorization. Please insert the pairing code you generated in the previous steps and tap on CONFIRM button.

AndroidiOS

 

Step by step guide - How to open paired doors using 2N® Mobile Key app

  1. If you have already paired the 2N® Mobile Key app with the 2N IP Intercom equipped with a Bluetooth module, go to close proximity of  BT reader.
  2. Open the 2N Mobile Key app and select the door you wish to access. Tap the button in the app to open the door.


     

    AndroidiOS



  3.  If you are authorized, the door will open, and a green circle will appear.

     

     

    AndroidiOS


    Back

    Info

    In case that 2N IP Intercoms are managed using 2N® Access Commander, you do not need to pair with each door device.

    When the app on a mobile device detects a new 2N Bluetooth-equipped device, it will connect to it and check if the user is authorized for access.

    Info

    In case that 2N IP Intercoms are not managed using 2N® Access Commander, the Administrator can export Bluetooth pairing settings backup and distribute it (import) to other door units. This procedure is described in the following article:

    Bluetooth, Administration - How to configure Bluetooth settings directly in device and how to distribute configuration ( export / import ) between devices

    When the app on a mobile device detects a new 2N Bluetooth-equipped device, it will connect to it and check if the user is authorized for access.

    Info

    In case that 2N IP Intercoms are not managed using 2N® Access Commander and the Administrator cannot distribute settings using export/import feature, a user needs to pair his mobile device with the app with each door unit.

    Faq_zapati

     

     

...