Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Download the latest 2N® Indoor Touch firmware version here.
  2. Get a MicroSD card (SDHC) with maximum capacity of 16GB and formatted to the FAT32 file system.
  3. Save the *.ZIP file and unpack its contents to the root directory of the MicroSD card. SD card has to contain these files - MLO, service_system.img, u-boot.img, uImage, updateupgrade.img
  4. Insert the SD card into the MicroSD card slot on the right side of 2N® Indoor Touch.
    Note:
     Make sure the contacts (pins) on the microSD card point towards the display of your 2N® Indoor Touch unit.
  5. Reset the device as follows:
    1. Press the Reset button on the back shortly
      OR
    2. Click the Reboot button in the Settings>Advanced menu:
  6. Having detected the correct firmware files, 2N® Indoor Touch invites you to confirm the update via touch screen.
    The update process is also indicated by an RGB LED on the device front.
    Note:
     
    Don't turn off the device until the update process is finished. The update procedure takes approx. 10-15 minutes.
  7. Remove the MicroSD card after the update procedure has finished and tap the display to restart the system.

...