...
You can connect directly by choosing TCP and filling the correct IP address, Port and Password
If you don't know the IP address please use the FAQ - IP address - How to get IP address of lift communicator 2N® Lift8
If you need to set Static IP addres or DHCP please use this FAQ - Static IP address - How to set up static IP address on 2N® Lift8
Press Connect
How to set the call destination
...
Don't forget to click on Save to device
Now your 2N® Lift8 is ready to make a call to IP phone.
...
1105 =** IP Addres of the SIP Proxy server
1106 =** Username
1107 =** Password
1109 =** SIP registrar port - usually 5060 is used for SIP communication
1112 =** Display name - this will appear on the display of the party you are calling to
Don't forget to click on Save to device
How to set the call destination
...
After logging in successfully, go to Account and fill in the following:highlighted parameters. Other parameters may be required by the PBX or your VoIP service provider.
- Select Enable for Line Active
- Label - identification of the account on the phone's display
- Display Name - shown as a caller ID on the device that is called by this phone
- Register Name - ID for authentication needed when the calls over PBX or VoIP service provider do not require registration
- User Name - ID for registration needed when the calls over PBX or VoIP service provider require registration
- Password - password for registration required by PBX or VoIP service provider
- Server Host - IP address of the PBX or SIP Proxy (provided by VoIP service provider)
- The rest of the parameters can be specifically required by your VoIP service provider or your PBX
