Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info
title2N® IP intercom FW & license

It is strong recommended to use the latest FW version for 2N IP Intercom as available here.

The 2N® IP Mobile application ver.4 does not need Enhanced integration or Gold license for the 2N IP Intercom for door opening anymore. 

How to configure 2N IP Intercom?

  • for firmware 2.23.1 and older:
    As a very first step go to the section  "Directory – Users", enable the desired position in the Phonebook and set the "Phone Number" to be dialled once you press an appropriate button of the intercom. If you want to call to the 2N® IP Mobile (Intercoms) application running in the 2N® Indoor Touch 2.0 unit, the number has to be filled in a format: "device:name". In our example the device name “IDT” is being used, see please the picture below.

...

       As a next step go to the section  "Services - Phone - SIP 1" and fill in the "Domain" field. For direct calls from the 2N IP Intercom to  2N® IP Mobile  (Intercoms) application it is recommended to fill in the IP address of intercom as shown in the picture below (IP address of the intercom in this example is 192.168.50.10).

Image Modified

 

  • for firmware 2.24.0 and later:
    As a very first step go to the section  "Directory – Users", create a new user and set the "Phone Number" to be dialled once you press an appropriate button of the intercom. If you want to call to the 2N® Indoor Touch 2.0 unit, the number has to be filled in a format: "device:name". In our example the device name “IDT” is being used, see please the picture below.

...

Last step is to assign newly created contact to quick dial button.

How to set 2N® Indoor Touch 2.0?

Once the 2N® Indoor Touch 2.0 is connected to the local network and powered (over PoE or using an external 12V DC/2A power supply) it will boot up and you see its initial screen (launcher). By clicking on the Intercoms application icon in the right upper corner you can open it and access its settings.

...