This FAQ may be applied to 2N® 2N IP Intercoms intercoms where no Enhanced Video License is installed. Firmware tested: 2.23. IP Address of the tested intercom was 192.168.50.133
- You've got an intercom without an active Enhanced Video License and you'd like to integrate it with your NVR or VMS systems. Your first option would usually be to use ONVIF, but because this would require the Enhanced Video License, which enables RTSP streaming and ONVIF, it's not possible to use unless you purchase this license.
- Or maybe you'd just like to quickly look at who's in front of your intercom from your web browser?
HTTP API setup
For cases like these, there's a workaround to view camera feed or integrate into NVR or VMS systems using HTTP API. This will not provide access to any of the advanced functions of ONVIF or RTSP, but it offers the possibility to view the intercom's camera feed. There are two ways to access the camera feed:
Unsecured camera access
You can access it freely without any sort of authentication. To do that, simply change these two values to Unsecure (TCP) and None.
Secured camera access
If you'd like to access the camera feed securely, which is always recommended, keep it at its default settings: Secure (TLS) and Digest. Then pick an account, enable it, and enter User Name and Password combination according to your preferences, then in User Privileges, enable Camera monitoring.
How to view the camera feed?
Enter the following string into any of the following programs and replace IP_address with your intercom's respective IP address. You can adjust the following image parameters to save on bandwidth: Width and Height define image resolution in pixels, 1280×960 px is maximum. FPS defines how many frames per second the stream will have, maximum is 15.
If you're getting poor framerate or would like to save on bandwidth while keeping high resolution and framerate, you can change the default JPEG compression quality down to 50 here.
Where to view the camera feed?
The easiest way to view the camera feed would be from your web browser. Just enter the above string into your web browser's search field. Depending on whether you chose to secure your intercom's camera feed or not you'll be asked to enter the HTTP API Account credentials you filled in previously.
Shortly after, the camera feed appears in your web browser.
VLC media player
VLC media player can open various media formats, one of which are network streams. To access this functionality, go to Media>Open Network Stream.
After clicking on Ok, the camera feed appears.
NVR and VMS systems
The same string would get you image in any NVR or VMS system that supports it.