Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. In the first step simply connect REX button to one of the inputs on 2N Access Unit via two wires.

    1. For 2N Access Unit M, use one of the pairs of wires for input, marked INPUT1 or INPUT2:
      Image AddedImage Removed


  2. In the second step connect to IP address of 2N Access Unit and go to section "Hardware->Door". Choose a switch which you want to control via the REX button (in our case it is "Switch 1") and the input to which you connected the REX button in the previous step (in our case "Input 1"). Set "Input mode" to "Non Inverted".

...

  1. In the first step simply connect REX button to one of the inputs of 2N Access Unit with two wire.
    1. For 2N Access Unit M, use one of the pair of wires for input, marked INPUT1 and INPUT2:
      Image AddedImage Removed
  2. In the second step connect to IP address of 2N Access Unit and go to section "Hardware->Door". Choose a switch which you want to control via the REX button (in our case it is "Switch 1") and the input to which you connected the REX button in previous step (in our case "Input 1"). Set "Input mode" to "Inverted".

...