Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

This FAQ 2nwiki describes how to configure CUCM 11 and 2N® Helios IP intercom to use as extension with CUCM. First part describes configuration of CUCM 11, you will see how to create user, phone and add line to this phone. Second part of this FAQ 2nwiki shows how to register 2N® Helios IP with created extension in CUCM 11.

...

First of all you have to create user. Create new user by clicking on Add New in section User Management->End User.

For this FAQ 2nwiki we choosed number 3650. All fields which contains this number in picture below has to be filled.

Image RemovedImage Added

Pictures below shows rest of the configuration of this section, it is in default state.

Image RemovedImage Added

Image RemovedImage Added

Image RemovedImage Added

How to add device

...

Now you have to configure the newly created device. Fill MAC Address. For parameter Phone Button Template choose Third-party SIP Device (Advanced ) if you have intercom with camera. If you have intercom without camera, you can choose Third-party SIP Device (Basic). Make sure that other configuration corresponding with configuration below.

Image RemovedImage Added

Image RemovedImage Added

How to add line

...

Edit the other configuration regarding the pictures below.

Image RemovedImage Added

Image RemovedImage Added

Image RemovedImage Added

Image RemovedImage Added

How to configure 2N® Helios IP intercom

...