Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

FAQ describes how to set 2N® SmartCOM PRO ETH for AMS function. 2N® SmartCOM PRO can with this function automatically reads read data from the INPUTS and store data in the internal memory. This feature is available for all units with firmware 1.13.X

...

Make sure that the 2N® SmartCOM PRO ETH jumpers are set as shown in figurethe following image


 

Pulse counting on S0 inputs

...

AT^SCAMS="DEV_ADD",128,"AIN_DIN","2/DIN","1M"                        - each minute will be digital value on input 2 will be stored in memory every minute
ossible time intervals:                                              - "1M", "2M", "3M", "4M", "5M", "6M", "10M", "12M", "15M", "20M", "30M", "1H", "2H", "3H", "4H", "6H", "8H", "12H", "1D"

...

AT^SCAMS="DIRECT_READ",128,"AIN_DIN","1/ADC/CAL"                     - readout of actualcurrent signal value on IN1, result is calibrated (range 0-100)
AT^SCAMS="DIRECT_READ",128,"AIN_DIN","2/DIN"                         - readout of actualcurrent signal value on IN2 and this value is transformed to a logical value ( range 0 - 1)
AT^SCAMS="DIRECT_READ",128,"AIN_DIN","1/PULSE/ABS"                   - read actualcurrent count of pulses on IN1


Excerpt Include
General AMS errors
General AMS errors

...