Search

Help

Page 4 of 201. Showing 2,003 results (0.301 seconds)

  1. 3.7 ZigBee

    ="PRECFGKEY_ENABLE"[,<0-1>] The command enables/disables sending of the encryption key. If configured for both the communicating devices, the key need not be sent at communication start…
  2. 4. Actions

    Automation example: 1. Event.KeyPressed: Key=Any 2. Action.SendHttpRequest: Uri=; Event=1 Command Pressed button Sent command http://192.168.1.1/message=$(1.Key) Quick dial…
  3. HTTP REST API – basic information and example

    syntax data are sent. Using those data from web browser you can easily replicate this command in your application. After successful login you will be also able to see in Response…
    FAQJun 30, 2020
  4. How to control 2N® Indoor Touch via Automation of 2N IP intercom

     StartEvent=3; Delay=3s - After this delay another command will be sent and the relay will be set back to 0. So this delay defines, for how long the relay will be closed…
    FAQMay 12, 2020
  5. How to control 2N® Indoor Touch via Automation of 2N IP intercom OLD

    are described in HTTP manual here. Event.Delay StartEvent=3; Delay=3s - After this delay another command will be sent and the relay will be set back to 0. So this delay defines, for how…
    FAQMay 12, 2020
  6. Automation, on demand lock activation / deactivation code in combination with time profiles and other access methods

    the timeout expires, Switch 2 is deactivated - if the time profile is not active. HTTP command with "reset" keyword is sent to reset FlipFlopRS to 0. Switch 2 deactivation related…
    FAQApr 22, 2020
  7. Loxone mini server - integration with 2N® intercoms

    ). The name of the input is the key parameter here, because it is used in the http command sent from the intercom. Another object which will be use is called „User defined…
    FAQApr 16, 2020
  8. 2. HTTP API Description

    All HTTP API commands are sent via HTTP/HTTPS to the intercom address with absolute path completed with the /api prefix. Which protocol you choose depends on the current…
  9. 2. HTTP API Description

    All HTTP API commands are sent via HTTP/HTTPS to the intercom address with absolute path completed with the /api prefix. Which protocol you choose depends on the current…
  10. 4.9 External SMS Control

    If this function is enabled for the active Telnet session, the GSM gateway automatically sends information on an incoming SMS message. An SMS message can also be sent using…