Search

Help

Page 1 of 476. Showing 4,752 results (0.077 seconds)

  1. How to control 2N® Indoor Touch via Automation of 2N IP intercom

    command with authentication credentials to create a session with the touch panel. The IP address has to be replaced by actual IP address of your  2N® Indoor Touch. Event.Delay…
    FAQMay 12, 2020
  2. How to control 2N® Indoor Touch via Automation of 2N IP intercom OLD

    with the touch panel. The IP address has to be replaced by actual IP address of your  2N® Indoor Touch. Event.Delay StartEvent=1; Delay=300mss - Delay on the third row ensures…
    FAQMay 12, 2020
  3. How to control 2N® Indoor Touch 2.0 via Automation of 2N IP intercom

    to create a session with the touch panel. The IP address has to be replaced by actual IP address of your  2N® Indoor Touch. Event.Delay StartEvent=1; Delay=300mss - Delay…
    FAQAug 21, 2019
  4. HTTP API - 2N® Indoor Touch output control by 2N® IP Verso automation

    URL: https://192.168.50.241/api/v1/gpio?action=set&name=relay1&type=value&value=0 Please define Indoor Touch IP address and password according to your settings.   faq tips 3rd…
    FAQMay 21, 2020
  5. Static IP address - How to set a static IP address?

    2N® Indoor Touch has the DHCP client enabled in default, so it expects to get an IP address from a local DHCP server dynamically. If you would like to assign some static IP
    FAQMay 12, 2020
  6. Static IP address - How to set up static IP address on 2N® IP Intercom

    In default setting the 2N® IP Intercom device uses a dynamic mode, the IP address is obtained from DHCP server. In case you need to use a static IP address setting you have…
    FAQMay 05, 2020
  7. IP address - How to get IP address of 2N® IP Intercom

    How to find IP address with 2N® IP Network Scanner If you need to find out the IP address of your 2N® IP Intercoms you could use our free software 2N® IP Network Scanner…
    FAQApr 08, 2020
  8. HTTP API - 2N® Indoor Touch 2.0 output control by 2N® IP Verso automation

    third URL: https://192.168.50.241/api/v1/gpio?action=set&name=relay1&type=value&value=0 Please define Indoor Touch IP address and password according to your settings.   icu2…
    FAQAug 21, 2019
  9. !Static IP address - How to set up static IP address?

    If you need to set a static IP address for your device, please proceed following instructions. Keep in mind that for further access to the web interface you will need…
    FAQDec 04, 2017
  10. IP address - How to get IP address of 2N® Access Unit?

    address from different IP address pool than your network the device can be placed behind the router or firewall there can be some troubles with you router (check IP address pool…
    FAQJan 17, 2019